Flotide A7/32 Swimming Pool Heater

Flotide A7/32 Swimming Pool Heater
Brand: HydroPro
Product Code: A7/32
Availability: In Stock
Price: £729.00
Ex Tax: £607.50

Available Options


* Wiring Options:



Qty:        

In stock in our UK warehouse - 2 to 3 working days delivery via pallet service.

The Flotide A7/32 Swimming Pool heat pump is over 4 times cheaper to run than using an electric only type heater, this model will heat a pool with up to 24 cubic metres pool volume. The Flotide A7/32 pool heat pump takes warmth from the surrounding air and gives the heat to the pool water via the built in heat exchanger. The Flotide A7/32 will operate above 8°c outside air temperature and is therefore suitable for heating swimming pools that are used in the summer months only. These pool heat pumps are designed for above ground pools that are generally erected for the summer season from late May to the end of August they will not work at lower temperatures encountered in other months of the year. We would recommend the standard “P” series models if you require a more extended running season.

This simple to use heat pump has a robust construction and comes with a 2 year guarantee. Take a look at the brochure below for full details on this model.

There is pre-wired option for this model of pool heat pump. For this option we will pre-wire the pool heat pump for you with a 7.5metre mains cable with a standard UK 13-amp mains plug attached. This then allows the pool heat pump to be plugged directly into a 13amp mains socket. Additional water pipe connections are also included.

We recommend that all pool heat pumps are fitted with a bypass kit to allow optimum running of the pool heat pump, click here to see our swimming pool bypass kits.

  • Flotide A7/32 swimming pool heat pump
  • 2 year warranty
  • Suitable for pools up to 24 cubic meters of water
  • Operates at an air temperature of 8°c and above
  • Easy to install and set up
  • Suitable for summer use swimming pools used between late May to the end of August
  • Requires a water pump with a water flow of 3 cubic metres hour flow rate
  • 240V Single phase model - Maximum running current 8.52 amps, we recommend the MCB circuit breaker controlling this circuit is a type D circuit breaker
  • Uses the latest R32 refrigerant

       Flotide A7/32 Pool Heat Pump